Eclipse II - Tech Talk Q & A
Q - Why design Eclipse II as a vertical take off and landing (VTOL) craft instead of the conventional horizontal take off?
A - VTOL has always been the aviation dream of combining versatibiltity with efficiency and speed. In this case we’re trying to have the quadcopter’s ability to take off and landing in small spaces while having the high efficiency fast forward travel of a fixed wing plane.
High speed quadcopters are possible, for example Project 'Eclipse', was an example of a quadcopter able to achieve 141kph, however unlike a fixed wing, quadcopters do this at extreme inefficiencies.
Eclipse II will be designed to be a craft capable of high speed flight without having to push itself to the limits. It is one of the new form factors currently in the testing stages around the world.
Q - Because Eclipse II is designed as a VTOL craft, how does it take off from the ground?.
A - Eclipse II will be taking off from a low cost launch platform. The platform resembles a small javelin on the ground. It is portable and low cost, approx $30.00. Landing Eclipse II does not have any special requirements.
Q - What are the complexities in making Eclipse II fly horizontally instead of vertically?
A - The arms on Eclipse II all have to be rotated. Normal quads have arms which are flat, but with their flat side facing the direction of travel. The benefit of the standard arrangement is that it is easly to bolt the arms together. To make the craft fly horizontally the rotation of the arms need to be accurate, yet strong. This is where 3D printing comes in. A central 3D printed hub will deliver precise positioning of the arms at the rotated angle, while the body work is 3D printed to be streamlined in the direction of travel.
Q - How many 3D printed components make up Eclipse II?
A - The total count is TBA, at the moment there are 4, We are attempting to reduce the complexity as much as possible courtesy of Additive technologies, while at the same time allow for easier repair by having separate parts.
Q - What are the specifications of the motors used to power Eclipse II?
A - The motors used and propellers will have to be tested post production. The KV rating, torque and propeller will all have to co-operate with the aerodynamics of the arms and the higher speed of the craft. For example traditional low pitch quad propellers might not work well. We won’t pretend to be able to do fluid dynamics calculations like some of the auto and aerospace industries are capable of, that’s why we’re going to be doing speed gun testings of different combinations post production.
Q - Is Eclipse II more manoeuvrable than a conventional quad, if so why?
A - The main goal is a scientific curiosity to explorer what we can do with current quad technologies. The hybrid craft is designed for a larger field, to race on car scale tracks and enjoy larger sceneries as a higher speed. At the higher proposed speed ranges manoeuvrability will actually not be as good as our original Project 'Eclipse'.
Q - What FPV camera system is to be used on Eclipse II, and will there be any image lag which could effect piloting and controlling the craft at such a high speed?
A - The imaging system is a linear race type antenna with a light weight low latency analogue camera. This combination does not provide the comfortable seat of a luxury sedan, but more a bumpy but high octane ride of a race car. In real world terms, the image quality isn’t as good, but weight, size, and aerodynamic savings are prioritised.
Q - What stage of development is Eclipse II at right now?, and when is it expected to start getting assembled?
A - The construction step is actually very short, most of the design work is in the planning and modelling of the 3D printing file. This is the stage the project is currently at. There are many challenges that have at times taken the project to a complete stop, but each time they have been resolved and the craft evolves after overcoming those hurdles.
Q - What have been the main design challenges so far?, and how have they been overcome?
A - An example is the CG (centre of gravity). For a high speed craft the aerodynamics require a very small frontal profile. This mean the battery and components all need to be positioned so that it forms a traditional torpedo shape while maintaining a good centre of gravity. Coupled with the arms which have to be aerofoils rotated from the traditional angle of quad arms. Most drone designers and builders would agree that this is not condusive to ease of construction and structural integrity. This is one of the main hurdles we have overcome using 3D printed designs.
Q - What design features have been incorporated to make Eclipse II easy to repair or replace parts in the event of a crash?, and Is it easier to fix than a conventional quad in the event of a similar crash?
A - The fundamental feature of the craft that makes reparability easy is the fact that it is 3D printed. When a part breaks you can just print another and you are ready to go again.



















Comments